Air-oil Fan Cooler - AH  

Home > Products > Hydraulic Power Units Accessories > Air-Oil Fan Cooler > AH Series

Cooler element, plate-fin heat exchanger, made up of superimposed aluminum, brazed in the furnace at controlled temperature around 600℃.

 

Maximum dynamic pressure: 20 bar.
Maximum static pressure: 30 bar.
Max. operating temperature: 120 ℃
(Disregarding the fan motor can stand for)

 

To protect the heat exchanger, it should be installed to the return line of the systems or when the equipment is started up running by the cold oil, a by-pass valve should always be mounted in parallel to the exchanger in order to avoid excessive pressure surges.

 

An alternate piping method is using a separate circuit from the reservoir with a small pump to drive the oil through the heat exchanger.

 

Filters are often incorporated into these side circuits or kidney loops, as they are sometimes called.
For all applications, except oil cooling, it is recommended to consult our technical department.

AH0608T
AH0608LT
AH1012 & AH1012-3P
AH1215
AH1417 & AH1470
AH1418
AH1428
AH1680
AH1890
AH2342
AH2342A
AH2583
P1 |  P2